The working temperature range offers many possibilities, e.g. routine applications, temperature control of samples, incubations, dental applications, material testing, corrosion tests, tempering of cultures as well as temperature testing of food and luxury articles. The “TC” baths are used for precise temperature control. They can be used as circulator or/and water/oil bath. The TC16 can be used for ASTM D70 purposes.
Main Characteristics
The insulation of the bath and electronic design result in a very stable working temperature of ±0.02K for the TC baths. The set point can be set in steps of 0.1° in the range form 0°C up to 250°C (32…482°F). The accuracy on the display is displayed in 0.1°C. However, the controller has an internal accuracy of 0.01°C. Two decimal readout is also available via the RS232 and the free Tamcom software. Due to the “self heating” of the stirring mechanism and when using a top lid,
the minimum temperature lies approximately 5K above the ambient temperature. When using the standard built-in cooling coil the minimum temperature lies approximately 5K above the temperature of the cooling liquid. In general the minimum temperature lies around 10°C. Lower temperatures generate problems with built up of condensate in the inner insulation of the bath.
ENGLISH
中文
