ENGLISH
中文
Position：Home > Information
PGC Portable Dynamic Gas Mixer
Gas detection
alarms bear the important responsibility of warning and preventing personnel's
own safety and property safety in advance. In order to ensure the accuracy and
sensitivity of their measured values, calibration or regular verification is
required. Calibration can ensure the accuracy and reliability of the alarm,
detect and correct possible faults or problems of the alarm. If the calibration
result is abnormal, it means that the alarm has quality defects, there is a
safety hazard during measurement, and it cannot be used in the market. At the
same time, given that the performance of the sensor in the alarm may change
over time, or be affected by environmental factors during use, the measured
value will be biased. Regular calibration can detect the deviation of the
instrument, timely maintenance or replacement of parts to correct the cause of
the deviation, to ensure the consistency and reliability of the measurement
results. Therefore, in order to obtain accurate and reliable gas alarm results,
calibration and regular calibration of gas detection alarms are necessary
steps.
The PGC Portable Dynamic Gas Mixer developed by EUCA Technology Co., Ltd. is the core product for calibration and verification of gas detection alarms. Its main function is to dilute high concentration standard gas to low concentration gas to test the response of each point of the gas detector; Or several gases are mixed into mixed gases to test the response of the detector to different concentrations of different components, or to carry out anti-interference tests on the detector. Finally determine the sensitivity and accuracy of the gas detector or alarm. Portable Dynamic Gas Mixer is the only portable dilution device on the market with an extended dilution ratio uncertainty of better than 0.5% (k=2).
Product advantage ◆ PGC Portable Dynamic Gas Mixer, with the world famous brand flowmeter controller control flow, dilution ratio of up to 10,000:1 ~1:1, flow uncertainty is not more than 0.5%, repeatability is not more than 0.2% ◆ The gas distribution process has a concentration mode and flow mode for the operator to choose according to the application needs ◆ PGC Portable Dynamic Gas Mixer is widely used in calibration and linearized gas detection alarms, on-site calibration gas analyzers, automotive emission test bench linearized standard devices, used in laboratory for gas monitor quality monitoring, calibration gas monitor/gas sensor, generating specific mixture environment, etc
Product value ☆ Lightweight, only 8 kg ☆ Compact, size is 330x230x300mm ☆ Built-in battery life is not less than 6 hours ☆ Built-in air pump, no need for external compressed air ☆ Suitable for corrosive gases, optional The device has been successfully applied to the calibration standard of the Chinese Academy of Metrology
|
 |
